Two dates decide your Kirara pre-order
The Blue Archive Kirara 1/7 scale figure from Max Factory has a pre-order close date of 2026-09-13. That is the deadline for committing to this run, not the day the figure reaches you. The manufacturer release date is Sep-2027, and the listed US arrival is Jan-2028.
Treat those dates as a planning chain: reserve budget and display space now, expect the figure to ship from the manufacturer in late 2027, and plan for it to reach the US in early 2028. If you need a figure on the shelf sooner, this pre-order will not do that job.
Kirara pre-order facts to plan around
- [Pre-order] Blue Archive - Kirara 1/7 Scale Figure Max Factory: Pre-order close date: 2026-09-13 This is the decision deadline for this pre-order window.
![[Pre-order] Blue Archive - Kirara 1/7 Scale Figure Max Factory](/uploads/sites/2287/import-1786952891026-553884845.jpg)
[Pre-order] Blue Archive - Kirara 1/7 Scale Figure Max Factory - [Pre-order] Blue Archive - Kirara 1/7 Scale Figure Max Factory: Release date (manufacturer): Sep-2027; US arrival: Jan-2028 Sets a realistic expectation for when the figure can actually be displayed.
- [Pre-order] Blue Archive - Kirara 1/7 Scale Figure Max Factory: Manufacturer: Max Factory; product type: 1/7 scale figure Identifies the exact figure and format so you can confirm it matches the Kirara you want.
What to confirm before 2026-09-13
Use the close date as a checkpoint, not a countdown to rush. These are the details worth confirming while the window is open.
- Character and series match: The listing names Blue Archive and the character Kirara. Confirm that is the version you collect before ordering.
- Scale and size fit your display: This is a 1/7 scale figure with an approximate height of H255mm. Measure your intended shelf or case clearance before the pre-order closes, not after the box arrives.
- Material expectations: The figure is listed as PVC and ABS. Plan handling and cleaning around those materials rather than assuming resin or polystone care.
- Timeline patience: With a Sep-2027 manufacturer release and Jan-2028 US arrival, the pre-order is a long commitment. Make sure that fits how you budget and display.
Why H255mm changes your shelf plan
At approximately H255mm, the Kirara figure needs vertical clearance above the base, not just footprint space. A shelf that fits smaller figures may not leave room for this one once you account for the figure's height and any display riser.
Measure the actual gap between shelves or inside your case before ordering. If the clearance is close, choose a lower shelf or open surface where the figure can stand without touching the shelf above. The supplied information gives the height but not the base footprint, so check the base dimensions once the figure is in hand rather than guessing now.
A display setup routine for when the figure arrives
The supplied record does not include assembly or handling instructions, so keep this routine to safe, general display preparation rather than manufacturer-specific steps.
- Clear and clean the surface first: Dust the shelf or case interior before placing anything. A clean surface reduces the dust that settles on PVC and ABS over time.
- Check vertical clearance against H255mm: Confirm the figure will stand without its head or accessories touching the shelf above. Adjust the shelf height or location if needed.
- Keep the figure away from direct sun and heat: Place the display out of direct sunlight and away from radiators, heaters, or other heat sources. This is general scale figure care, not a product-specific instruction.
- Handle with clean, dry hands: Support the figure from stable points when moving it. Avoid gripping thin or protruding parts.
- Dust gently and regularly: Use a soft brush or gentle air to remove dust from surfaces and crevices. Avoid abrasive cloths and harsh cleaners on PVC and ABS.
What the supplied information does not cover
The product record lists material, height, manufacturer, and dates, but it does not include assembly steps, a base footprint, care instructions, or an age recommendation. Treat any missing detail as something to confirm with the retailer or manufacturer rather than assuming.
That does not make the figure a poor choice. It simply means your display prep should rely on measured clearance and general PVC and ABS care until official handling information is available.


![[Pre-order] Blue Archive - Kirara 1/7 Scale Figure Max Factory](https://nekotwofgt.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F2287%2Fimport-1786952891026-553884845.jpg&w=800&q=86)